logo

Eyelet & Grommet Machines

We provide JopeviStimpson, and United semi and fully automatic grommet machines eyelet and grommet machines for cutting holes into material as well as setting the eyelet and washer. Machines are set for all applications and sizes.

A grommet is a ring or edge strip inserted into a hole through thin material, typically a sheet of textile fabric, sheet metal and or composite of carbon fiber, wood or honeycomb. Grommets are generally flared or collared on each side to keep them in place, and are often made of metal, plastic, or rubber. They may be used to prevent tearing or abrasion of the pierced material or protection from abrasion of the insulation on the wire, cable, line being routed through the penetration, and to cover sharp edges of the piercing, or all of the above.

A small grommet may also be called an eyelet, used for example on shoes, tarps and sails for lacing purposes. In electrical applications these are referred to as “insulating bushings”. Most common are molded rubber that are inserted into small hole diameters up to 2″ in diameter. There are many hole configurations from standard round to assorted U-shapes. Larger penetrations that are irregular in shape as well as long straight edges often use extruded or stamped strips of continuous length. These Continuous length materials are referred to as “grommet edging”.

These are quite common in applications that range from telecom switches and data center cabinets to complex and dense wire/cable and even hydraulic tubing in aircraft, transportation vehicles and medical equipment.

If you are looking for a fully automatic grommet machine or automatic eyelet machine contact RSK Sales today at  (818) 468-0579 .

Products


Jopevi J-239 / J-239R: Electronic Dual Feed Automatic Grommet Machine

Automatic Grommet Machine These automatic grommet machines are completely electronic and do not require pneumatic service. These machines are available for the following sizes of Stimpson grommets and washers: Model J-239: Plain grommets with neck washers, sizes #0 through #4 Model J-239R: Rolled rim grommets with spur washers, sizes #0 through #4   Operation These machines are very easy to operate. Simply line
Read More

Jopevi J-237: Electronic Single Feed “Shuttle” Automatic Grommet Machine

Description The Model J-237 is a single feed electric automatic grommet machine and washer machine. It uses a hand-operated shuttle device to move the plain washer into place, maintaining the operator’s hands at a safe distance from the setting dies. This automatic grommet / washer machine can semi-automatically punch a hole into your material and set both the grommet and washer with one press of the foot pedal
Read More

United Model F: Eyelet / Grommet Machine

Description This eyelet / grommet machine is principally used in industrial trades rather than shoe manufacturing but there are applications in the shoe industry such as teh setting of ventilation eyelets in tennis and basketball shoes for which it is especially adaptable. Its sturdy, versatile design permits setting several eyelets simultaneously. Its horn type of construction provides means for eyeletting at points
Read More

Stimpson No. 482 Dual Feed: Automatic Electric Eyelet / Grommet Machine with Automatic Clamper

Description These eyelet / grommet machines are designed for inserting eyelets or grommets in fabric or similar material without first punching a hole. The automatic clamper is part of the mechanism of these machines. The No. 482 Dual Feed can also insert telescoping eyelets and neck washers.   Operation The material is held by the operator in position over the setting tool on top of the bottom clamper. When the
Read More

Stimpson No. 482 Single Feed: Automatic Electric Eyelet / Grommet Machine with Automatic Clamper

Description These eyelet and grommet machines are designed for inserting eyelets or grommets in fabric or similar material without first punching a hole. The automatic clamper is part of the mechanism of these machines.   Operation The material is held by the operator in position over the setting tool on top of the bottom clamper. When the foot switch is pressed, the clamper comes down and clamps the material fi
Read More

Stimpson No. 488: Double Action Automatic Grommet and Eyelet Machine – Bench Model

Description This grommet and eyelet machine is designed especially for a range of eyelets having 3/16″ through 13/16″ outside diameter with maximum flange diameter 1-3/8″. Illustrated is a single feed Eyeleting machine. However, this machine can also be furnished as a double, triple or quadruple feed machine. With factory adjustment this can be used as a double cycle machine (punch and set).  
Read More

Stimpson No. 484: Automatic Feed Grommet / Eyelet Machine – Bench Model

Description This grommet / eyelet machine is designed for a range of eyelets having .045″ to .375″ outside barrel diameter, maximum flange diameter .600″. All eyelets between 0.45″ and 0.93″ outside diameter require spindle stop attachment. Very popular for volume use with Stimpson GS® – Graduated Size Eyelets and C-E® Rivets. Illustrated is a single feed Eyeleting machine. However
Read More

mastercard(818) 468-0579 − rod@rsksales.comvisa

¤